Menu
Cart 0

KSD Kmax VV / VW Telescoping Mod

  • 4999


The KSD KMax is one of the best Mods on the market. It has the telescoping feature and you can use a 18350, 18650, 18500 or even two 18350 batteries. One of the coolest things about it is the mirrored band around the top that hides the LED display. When first looking at it the display is not visible. However when you start using it the display becomes visible.

The Kmax comes with a nice top cap to keep most bigger tanks flush while other smaller tanks like the Protank Mini and CE4 will fit inside the cap slightly. The one button design takes a little getting used to but works great all in all.
 
The Kmax uses both variable voltage as well as variable wattage. Another awesome feature of the Kmax is that it utilizes both 510 as well as Ego threading. That means that most any tank, clearomizer or atty that you can find will work with your Kmax.

Like all of our ecig / Mod starter kits the KSD Kmax comes with a free 6ml bottle of e-liquid.
 
The Kmax Comes With
1x Kmax Body
1x Surefire 3000mah Battery and Charger (optional)

How to use your Kmax:
 
1. In standby mode, press the button 3 times quickly ,when LCD shows 1.Uu/1.Pu,leave the button for 2 seconds, you can now adjust the voltage or wattage up in 0.1v /0.5w increments, it will cycle around and turn back to 3.0v/3.0w when you reach and pass 6.0v/15w.
 
2. In standby mod, press the button 4 times quickly, when LCD shows 2.Ud/2.Pdleave the button 2 seconds, you can now adjust the voltage or wattage down in 0.1v /0.5w increments, it will cycle around and turn back to 6.0v/15w when you reach and pass 3.0v/3.0w.
 
3. In standby mode, press the button 5 times quickly, when the LCD shows 3.So,leave the button 2 seconds, you can now chose S.on or S.oF, the LCD will display ----,power will be turned off. In this setting the mod is off and cannot produce vapor. To turn it back on simply repeat the process and chose S.on to start the device.
 
4. In standby mode, press the button 6 times quickly, when the LCD shows 4.Uc,leave the button 2 seconds, the LCD will show you the battery power remaining.
 
5. In standby mode, press the button 7 times quickly, when the LCD shows 5.dSleave the button 2 seconds, you can now chose for the display to show do/dR/du,
 
do:output voltage.
 
dR:atomizers resistance.
 
du: battery voltage.
 
6. In standby mode, press the button 8 times quickly, when the LCD shows 6.Lo,leave the button 2 seconds, you can now chose L.on or L.oF,
 
L.on:LCD is on when smoking.
 
L.oF,LCD is off when smoking.
 
7. In standby mode, press the button 9 times quickly, when the LCD shows 7.UP,leave the button 2 seconds, you can now choose to use the Kmax in Po or Uo.
 
Po: Wattage.
 
Uo. Voltage.

The KMax+ is the newest E-cig Mod/APV Available from VapingZone. The KMax+ is better tuned for voltage and wattage.  The KMax+ also has a new easy to read screen with a white OLED. 
 
When the battery is removed and replaced in under 30 seconds, the KMax+ will retain either your voltage or power/wattage settings.  When switching between voltage or power/wattage, KMax+ will retain your last setting. 

 

Recomended Batteries
 
 
 
This Mod/APV has a 510/eGo threading.
 
The KMax+ is a new intelligent e-cig Mod/APV, not only can you adjust the voltage, but you can also adjust the wattage.  It will work with 1 - 18650 IMR High Drain Battery, 2 or 1 - 18350 IMR High Drain Flat Top batteries.  This mod produces consistent voltage and consistent wattage.
 
1. The KMax+ can be adjusted from 3.0-6.0V volts in 0.1 volt increments.
 
2. The KMax+ allows you to visually adjust your voltage and wattage.
 
3. The KMax+ Telescope can fit 1 - 18650 IMR High Drain Battery, 2 or 1 18350 IMR High Drain Batteries with reverse connect protection.
 
4. The Body is made of copper.
 
5. The KMax+ has a 510/eGo thread.
 
6. The KMax+ has a maximum output of 15 watts.
 
7. The KMax+ can be adjusted in power from 3.0 --15 W in 0.5 watts increments.
 
8. The KMax+ PCB allows 5 Amp output limit.
 
9. The KMax+ button never gets stuck, the button allows for 360° turning
 

Menu Instructions:

Menu 1 Adjust Power/Voltage up

Menu 2 Adjust Power/Voltage down

Menu 3 Wattage or Voltage

Menu 4 Display info setting during vaping 
          output voltage or opearating wattage
          atomizer resistance;
          Current

Menu 5 LCD ON/OFF

Menu 6 Power ON/OFF

8. All these operations should be performed with in 2 seconds of pressing the button

9.  F1 will read on the screen when there is a short circuit; "F2" will read on the screen when the output resistence is lower than 1.2ohm; When the input voltage is over 9V, the screen will read "HHH"

10.  When a using a single battery and the voltage is lower than 3.3V, or if using double batteries lower than 6.0V, the screen will read "LoU".  The batteries will require charging at this point.

11. Connector type: 510 thread

12. Kmax+ size: Max diameter: 25mm;   

                  Total Length with: 

                           18350 -- 109mm; 

                           18500 -- 122mm; 

                           18650 -- 137mm.

The KMax+ is shipped in a gift box.

- See more at: http://vapingzone.com/product-info.php?KMax__Oled__E-Cig_Mod_Telescope_VV_and_VW_Body_Only-pid1357.html#sthash.5uKorESO.dpuf
The KMax+ is the newest E-cig Mod/APV Available from VapingZone. The KMax+ is better tuned for voltage and wattage.  The KMax+ also has a new easy to read screen with a white OLED. 
 
When the battery is removed and replaced in under 30 seconds, the KMax+ will retain either your voltage or power/wattage settings.  When switching between voltage or power/wattage, KMax+ will retain your last setting. 

 

Recomended Batteries
 
 
 
This Mod/APV has a 510/eGo threading.
 
The KMax+ is a new intelligent e-cig Mod/APV, not only can you adjust the voltage, but you can also adjust the wattage.  It will work with 1 - 18650 IMR High Drain Battery, 2 or 1 - 18350 IMR High Drain Flat Top batteries.  This mod produces consistent voltage and consistent wattage.
 
1. The KMax+ can be adjusted from 3.0-6.0V volts in 0.1 volt increments.
 
2. The KMax+ allows you to visually adjust your voltage and wattage.
 
3. The KMax+ Telescope can fit 1 - 18650 IMR High Drain Battery, 2 or 1 18350 IMR High Drain Batteries with reverse connect protection.
 
4. The Body is made of copper.
 
5. The KMax+ has a 510/eGo thread.
 
6. The KMax+ has a maximum output of 15 watts.
 
7. The KMax+ can be adjusted in power from 3.0 --15 W in 0.5 watts increments.
 
8. The KMax+ PCB allows 5 Amp output limit.
 
9. The KMax+ button never gets stuck, the button allows for 360° turning
 

Menu Instructions:

Menu 1 Adjust Power/Voltage up

Menu 2 Adjust Power/Voltage down

Menu 3 Wattage or Voltage

Menu 4 Display info setting during vaping 
          output voltage or opearating wattage
          atomizer resistance;
          Current

Menu 5 LCD ON/OFF

Menu 6 Power ON/OFF

8. All these operations should be performed with in 2 seconds of pressing the button

9.  F1 will read on the screen when there is a short circuit; "F2" will read on the screen when the output resistence is lower than 1.2ohm; When the input voltage is over 9V, the screen will read "HHH"

10.  When a using a single battery and the voltage is lower than 3.3V, or if using double batteries lower than 6.0V, the screen will read "LoU".  The batteries will require charging at this point.

11. Connector type: 510 thread

12. Kmax+ size: Max diameter: 25mm;   

                  Total Length with: 

                           18350 -- 109mm; 

                           18500 -- 122mm; 

                           18650 -- 137mm.

The KMax+ is shipped in a gift box.

- See more at: http://vapingzone.com/product-info.php?KMax__Oled__E-Cig_Mod_Telescope_VV_and_VW_Body_Only-pid1357.html#sthash.5uKorESO.dpuf

We Also Recommend
NOT FOR SALE TO MINORS | CALIFORNIA PROPOSITION 65 - Warning: This product contains nicotine, a chemical known to the state of California to cause birth defects or other reproductive harm. PEC Vape Shop products are not smoking cessation products and have not been evaluated by the Food and Drug Administration, nor are they intended to treat, prevent or cure any disease or condition.